This is our M30 THRU BB for installing the Praxis LYFT crank into BB90 or BB92 MTN frames. It is also good for other brand 30mm cranks like SRAM, RaceFace/Easton “Cinch” cranks, Rotor Rex/3D+ cranks, and CaneCreek eeWings. See full spec and notes below.
SPECIFICATIONS
VIP NOTE : The M30-THRU family of Praxis BB’s can be used with other brand cranks.
COMPATIBILITY
FRAME TYPE : This specific M30 bottom bracket is made to be installed in a BB86 Road frame, or a BB90 or BB92 MTN frame.
SPINDLE MEASUREMENT CHECK :
103mm or longer for Road | 108mm or longer for MTN
BEARINGS : Praxis M30-THRU bottom brackets have a 30mm Drive and a 30mm NonDrive Bearing.
TOOL : This specific M30 bb is a press fit and uses a press tool/drift for installation, and a cup-removal tool for removal. These are very specific tools so talk to your local bike shop if you do not own. Please read the instructions carefully for installation.
OTHER BRAND CRANKS -READ & FOLLOW YOUR CRANK INSTRUCTIONS
You must read and follow the crank instructions that came with your specific brand and model of crank to determine the correct setup. Praxis provides 2mm dust covers for each side as base setup, but every brand has its own specific crank setup. You man need additional spacers depending on your brand crank. So please follow your brand’s instructions.
| 구분 | 내용 | 작성자 | 작성일 |
