This is our M30 THRU BB for installing the Praxis LYFT crank into 68/73mm BSA MTN frames. Also good for other brand 30mm cranks like SRAM, RaceFace/Easton “Cinch” cranks, Rotor Rex/3D+ cranks, and CaneCreek eeWings. See full spec and notes below.
SPECIFICATIONS
VIP NOTE : The M30-THRU family of Praxis BB’s can be used with other brand cranks.
COMPATIBILITY
FRAME TYPE : This specific M30 bottom bracket is made to be installed in a BSA frame, also known as an English Threaded frame.
SPINDLE MEASUREMENT CHECK :
103mm or longer for Road | 108mm or longer for MTN
BEARINGS : Praxis M30-THRU bottom brackets have a 30mm Drive and a 30mm NonDrive Bearing.
TOOL : This M30-THRU bottom bracket uses our M30 BB tools for installation and removal. Sold separately, these are available in either an M30 socket style tool here or as wrench style tool.
OTHER BRAND CRANKS -READ & FOLLOW YOUR CRANK INSTRUCTIONS
You must read and follow the crank instructions that came with your specific brand and model of crank to determine the correct setup. Praxis provides 2mm dust covers for each side as base setup, but every brand has its own specific crank setup. You man need additional spacers depending on your brand crank. So please follow your brand’s instructions.
| 구분 | 내용 | 작성자 | 작성일 |
